As a homeowner or occupant you may perform electrical work on your own property without being a certified electrical contractor.
Can a homeowner replace electrical panel in ontario.
The electrical panel is the center of electricity supply in a home or building.
It is a network of wires and switches.
Electrical panel replacement typically takes 8 to 10 hours which includes 200 amp capability a new panel with main breaker and ten circuit breakers labor and all required materials.
The electrical panel also known as a breaker panel fuse box or breaker box is a metal box that holds circuit breakers or fuses that distribute power throughout your home.
Breakers are better than fuses we keep blowing breakers.
The contact at the mgcs came back and said under the licensing of electrical contractors and master electricians regulation only certain individuals such as a homeowner or a licensed electrical contractor are legally allowed to do electrical work in a home that falls within the scope of the ontario electrical safety code.
As you can imagine homeowners provide me with a variety of answers such as.
You can potentially do some electrical work yourself but you first need to understand the implications of diy electrical work and the law.
With an electrician s hourly rates at 40 to 100 hour and with the first hour costing 75 to 120 you can expect to spend between 400 and 800 for labor costs.
With that said changing an electrical panel is a large undertaking and should not be done by anyone not holding a certificate of qualification supervised by a designated master electrician.
Homeowner s intro to the electrical panel.
It is called several other names such as the distribution board and breaker panel.
However new wiring and electrical outlets usually require a permit.
As a homeowner you should do the same thing if your ec suggests a panel upgrade.
But when the permits are more expensive than the light switches and there are no inspections the general attitude is that this is just a government money grab and very few people get permits while there are a.
You can identify the electrical panel as a metal electrical service board located outside the home in the garage or the utility room.
The biggest cost for most electrical work is labor.
You may not need a permit for minor maintenance or replacements such as a fuse or light.